Introducing JHM Tuning for the B7-A4 2.0T FSI!!!

 *AS OF 1/23 B7 A4 TUNING HAS MOVED TO OUR POWER-CONNECT FLASHING SERVER AND REQUIRES THE POWER-CONNECT SOFTWARE*

After a lengthy research and development period followed by extensive testing, JHMotorsports is proud to officially release our comprehensive ECU Tuning for the B7-A4 2.0T FSI.

This is the same tuning that was featured in all of our record setting quarter mile runs:

100+ Octane, 13.38 seconds at 100.3 mph - WORLD'S FASTEST STOCK TURBO B7-A4!!!

93 Octane, 13.59 seconds at 99.7 mph

91 Octane, 13.87 seconds at 96.7 mph

Following our success with the FSI motor in the B7-RS4 and B8-S5 we turned our attention to the 2.0T FSI from the B7-A4. We have created tuning for the B7-A4 2.0T FSI that transforms your car. Our tuning will give your B7-A4 2.0T FSI improved throttle response and more power throughout the entire RPM range leading to faster acceleration and a much more rewarding driving experience. Our experience in all motor or naturally aspirated FSI tuning has allowed us to maximize the capabilities of the 2.0T motor making it hit hard in the low end of the RPM range and then extract more power from it "up top" once the boost begins to taper off. 

We have used our extensive experience and latest advancements in Audi ECU calibration to bring you the best high-performance ECU calibration for your 2.0T FSI. In our ECU tuning, we change 100s of parameters in the ECU to allow the 2.0T motor to make the most power it is capable of producing safely without sacrificing reliability and dependability.

Other tunes on the market right now were created when the B7-A4 2.0T first came out making them nearly 10 years old! Many of those tunes haven't been revised in years because other tuners have moved on. We're able to combine our experience with forced induction tuning and advancements in ECU calibration from the past several years to create the ultimate software tune for the B7-A4 2.0T FSI.

FEATURES

JHM LAUNCH ASSIST
Another advancement that we have brought to the B7-A4 2.0T Platform is our proprietary JHM Launch Assist. Developed for the B7-RS4 as an industry first, we have implemented our JHM Launch Assist on all 6-Speed Manual tunes for the B7-A4 2.0T. When activated and engaged, the JHM Launch Assist reliably gets your car from zero to all out acceleration every time! 

Available Files and Hardware Requirements:

- 91 Octane Stage 1 - Stock Cat Back
- 91 Octane Stage 2 - Turbo-Back Exhaust
- 91 Octane Stage 2 w HPFP - Turbo-Back Exhaust and High Pressure Fuel Pump Upgrade (JHM or equivalent)
- 93 Octane Stage 1 - Stock Cat Back
- 93 Octane Stage 2 w HPFP - Turbo-Back Exhaust and High Pressure Fuel Pump Upgrade (JHM or equivalent)

NOTE: As designated above, these hardware requirements are a MUST. If your car is completely stock, you will need to select the stage 1 software with the correct octane that you use on a regular basis.

OPTIONS: When you place your order for JHM Tuning, please specify your year, body type, octane, transmission type, and flashing method by using the drop down boxes below.

DISCLAIMER: JHM is now using proven flashing technology in order to get our tunes on our customers' cars in the quickest and most convenient way possible. You will be installing a proprietary JHM software that works ONLY with our flash cable (supplemental software such as Microsoft .net may be required). This program is what allows you to detect your ECU part number, fill in your information, select the correct program based on your hardware and then write JHM Tune to your ECU all through your OBD II port. Both of these programs are highly specific when it comes to configuring your computer to run them properly. While every effort has been made to clearly and completely explain this configuration in our instructions, the customer will ultimately be responsible for removing or disabling their own or third party anti-virus software or firewalls that will block the port required for you to log into our flashing server (see the link to our instructions below to determine whether or not this is something you'll be able to do). Basic technical support provided by JHM to help install these programs on your computer, diagnose programs with your computer, and/or internet connection may be subject to an hourly fee. Additionally, if something happens to your ECU during the flashing process, you should be able to restore it using our software. If you are still unable to make the ECU flash properly, you will be responsible for all costs associated with restoring your ECU and fixing the issue.

Requirements for Tune: 
- Windows computer with at least 1 USB (Universal Serial Bus) port 
- Wired Broadband Internet Connection (wireless can be unreliable) 
- JHM Tuning-Flashing Cable (Flash cable length cannot extend beyond 10 ft long unless a powered USB hub is installed in-line. 
- Battery Charger or equivalent power source capable of sustaining a 40 amp charge